From 1st October 2019 all DVSA accepted brake tester installations for 3/4/5 and 7 Class Testing, must be able to interface with the MOT testing service PC. The Garage Equipment Association (GEA) published a list of DVSA accepted equipment.
The Nussbaum range of roller brake testers; the NTS 810 and BT650 are MOT connected DVSA accepted equipment.
- Nussbaum NTS 810 – with 700mm roller chassis, for Classes 3 & 4, for both standard and ATL test lanes.
- Nussbaum NTS 810 – with 1000mm roller chassis, for Classes 3, 4 & 7, for both standard and ATL test lanes.
- Nussbaum BT650 HGV Visio Brake Tester – for Classes 3, 4, 5 & 7, for standard, ATL and ATF test lanes. This model is currently 1 of only 2 brake testers which are connected for ATF testing.
Straightset are approved distributors of Nussbaum garage equipment. With over 20 years’ experience working with Nussbaum; supplying, installing and servicing a large range of equipment including vehicle lifts and testing equipment. Nussbaum brake testers now meet the DVSA requirement for connection to the DVSA MTS system.
Nussbaum has a full range of roller bed Brake testers covering all classes of MOT classifications from Class I to ATF brake testers for HGVs. Existing PC based Nussbaum brake-testers will be able to be upgraded.
The added benefit of choosing a Nussbaum brake tester from Straightset is that the range is not supplied with passcode protection, allowing open access to calibrate. This should be a key consideration when investing in a new brake tester, as this enables customers the flexibility to change calibration contractor should they wish to rather than being forced to use the supplier to calibrate for the life of the machine.
For more information about the connected Nussbaum roller brake testers you can see the full specification of product by clicking the links above and ‘add to quote’ for a quick and convenient quotation direct to your inbox. Alternatively, you can contact our friendly sales teams on 01909 480055 or firstname.lastname@example.org.