HPA C500 1.1 Wheel Alignment System

HPA C500 1.1 Wheel Alignment System

HPA C500 1.1 Wheel Alignment System Form

Contact sales for a quotation.


HPA C500 1.1 Wheel Alignment System, cabinet for Control Unit on swivelling wheels with the following specification:-

• Radio/CCD PC-based wheel aligner. 2.4 GHz industrial radio transmission.
• Cabinet for control unit on swivelling wheels. LCD colour monitor (optional).
• WINDOWS-based software.
• Alignment angle measurement with CCD goniometers. Radio transceivers and/or via cable measuring heads.
• Removable batteries. Integrated electronic encoders.
• Multibrand Data Bank with over 20,000 vehicles.
• Special dedicated procedures for VW-AUDI Group and Adjustment Animations (standard).

Supplied with:-
• Set of 4 Radio Wireless measuring head set
• CD ROM with back-up program
• AAP – AVP procedure kits
• Moveable battery charger
• 2no. Sets of moveable batteries (8 pcs.)
• Steering wheel holder
• Pedal depressor
• Operator’s instruction manual.

Technical data:-
Measuring ranges:-
Total toe: ± 48°
Camber: ± 10°
Caster: ± 30°
King pin angle: ± 30°
Set back: ± 24°
Thrust angle: ± 24°
Steering angle: ± 24°
Power supply voltage (std): 115-230Vac / 50-60Hz/ 1 Ph
Absorbed power: 500 W
Weight without accessories: 75 kg. 

Accessories available

  • LCD 19" Colour Monitor
  • Procedure Kits (AVP Audi,VW), (AAP Animated Adjustment), (MBP Mercedes Benz) (TTP Truck & Trailer).
  • Wheel Alignment ON LINE data bank 10 Credit cards.
  • Software update (with new Data Bank).
  • Pair of 4-point Clamps from 10" to 19" with built-in spoiler adapter and double-profile claws.
  • Pair of heavy duty 4-point clamps from 17.5" to 25".
  • Set of four double-profile claws (set for one clamp only).
  • Set of four Racing claws (set for one clamp only).
  • Pair of 4-point Clamps from 10" to 26" with built-in spoiler adapter and double-profile claws (for cars only).
  • Extension set to 28" (set for one clamp only).
  • Set of found 3-point automatic quick clamps from 10" to 20" (for ALU rims and well centered rims, "run out" compensation is not required).
  • Set of 12 extensions to 22" for 3-point quick clamps.
  • Set of 12 short claws (set of 4 clamps).
  • Set of 12 long claws (57mm) (set of 4 clamps).
  • Set of 12 shaped claws (set of 4 clamps).
  • Set of 12 claws for rims with outstanding profile (set for 4 clamps).
  • Set of 12 extensions (set for 4 clamps).
  • Complete set of Mercedes and BMW adapters for 4 & 5 hole wheels, with measuring holes (25 pcs). (Only used in combination with 3-point clamps).
  • Complete set of Porsche adapters (4+4 pcs). (Only used in combination with 3-point clamps).
  • Set of 12 claws for IVECO Daily steel rims (only used in combination with 3-point clamps).
  • Pair of Weel clamps; self-centering and self run-out compensation for Mercedes and BMW.
  • Set of 4 wheel clamps; self-centering and "run-out" compensation skip for Trucks "on the road". For all well centered rims, "run out" compensation is not required.
  • Pair of Turntables with "encoder" for steering measurement. Max. load 1000kg.
  • ROC push-mode Kit (2 pcs) for Turntables.
  • Set of 4 drive-on ramps for Turntables.
  • Set of two rear slip plates. H=57mm. (To match mechanical front turntables).
  • Heavy-duty Turntable for Trucks and Buses (1 piece only). Max. load 3000kg.
  • Pair of heavy-duty Turntables with indexed scale up to 60 degrees (max. load for single turntables).
  • Pair of spoiler adapters for Cars.
  • Pair of spoiler adapters for Trucks.
  • Trailer Alignment Kit.
  • Set of 4 extra batteries.
  • AMV 1925 Device. To measuring and ajusting Cars with VAS Group MULTILINK suspensions.
  • Video Splitter Kit.
  • Calibration Frame for measuring heads (complete with full scales Calibration Kit).
  • Cable connection from Main Unit to CCD Heads. L=16mt.
  • Toe pressure bar for Mercedes Vehicles.
  • Pedal Depressor.
  • Steering Wheel Holder.